Tra cứu Tiêu chuẩn
Tìm thấy 19.493 kết quả.
Searching result
| 2621 |
TCVN 13057-7:2020Công nghệ thông tin - Mạng cảm biến: Kiến trúc tham chiếu mạng cảm biến (SNRA) - Phần 7: Các hướng dẫn khả năng liên tác Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 7: Interoperability guidelines |
| 2622 |
TCVN 13058:2020Phương tiện giao thông đường bộ – Hệ thống truyền động điện – Yêu cầu và phương pháp thử trong phê duyệt kiểu Road vehicles – Electric power train – Requirements and test methods in type approval |
| 2623 |
TCVN 13059:2020Phương tiện giao thông đường bộ – Xe cơ giới và các bộ phận liên quan đến hiệu năng an toàn của phương tiện sử dụng nhiên liệu hydro (HFCV) – Yêu cầu và phương pháp thử trong phê duyệt kiểu Road vehicles - Motor vehicles and their components with regard to the safety-related performance of hydrogen fuelled vehicles (HFCV) - Requirements and test methods in type approval |
| 2624 |
TCVN 13060:2020Phương tiện giao thông đường bộ – Thiết bị và bộ phận có thể lắp và/hoặc sử dụng trên phương tiện có bánh xe – Yêu cầu và phương pháp thử phê duyệt kiểu xe truyền động điện Road vehicles - Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles - Requirements and test methods in type approval for the electric power train |
| 2625 |
TCVN 13061:2020Phương tiện giao thông đường bộ – Phương tiện có độ ồn thấp ảnh hưởng đến khả năng nhận biết của người tham gia giao thông – Yêu cầu và phương pháp thử trong phê duyệt kiểu Road vehicles – Quiet road transport vehicles with regard to their reduced audibility – Requirements and test methods in type approval |
| 2626 |
TCVN 13062:2020Phương tiện giao thông đường bộ – Khí thải gây ô nhiễm phát ra từ mô tô (mức 4) – Yêu cầu và phương pháp thử trong phê duyệt kiểu Road vehicles – Gaseous pollutants emitted by motorcycles (level 4) – Requirements and test methods in type approval |
| 2627 |
TCVN 13063-1:2020Hệ thống giao thông thông minh (ITS) – Giao thức hướng dẫn qua thiết bị ITS cá nhân cho các hệ thống cảnh báo an toàn giao thông - Phần 1: Thông tin chung và xác định trường hợp sử dụng Intelligent transport systems –Guidance protocol via personal ITS station for advisory safe system Part 1: General information and use casedefinitions |
| 2628 |
TCVN 13063-2:2020Hệ thống giao thông thông minh (ITS)– Giao thức hướng dẫn qua thiết bị ITS cá nhân cho các hệ thống cảnh báo an toàn giao thông - Phần 2: Các yêu cầu và đặc tả giao thức hướng dẫn đường bộ Intelligent transport systems(ITS)–Guidance protocol via personal ITS station for advisory safe system - Part 2: Road guidance protocol (RGP) requirements and specification |
| 2629 |
TCVN 13063-3:2020Hệ thống giao thông thông minh (ITS)– Giao thức hướng dẫn qua thiết bị ITS cá nhân cho các hệ thống cảnh báo an toàn giao thông - Phần 3: Đặc tả kiểm thử sự phù hợp với giao thức hướng dẫn đường bộ Intelligent transport systems(ITS)–Guidance protocol via personal ITS station for advisory safe system -Part 3: Road guidance protocol (RGP) conformance test specification |
| 2630 |
TCVN 13064-1:2020Hệ thống giao thông thông minh (ITS) – Giao diện phương tiện để cung cấp và hỗ trợ dịch vụ ITS - Phần 1: Thông tin chung và xác định trường hợp sử dụng Intelligent transport systems – Vehicle interface for provisioning and support of ITS services - Part 1: General information and use case definitions |
| 2631 |
TCVN 13064-2:2020Hệ thống giao thông thông minh (ITS) – Giao diện phương tiện để cung cấp và hỗ trợ dịch vụ ITS – Phần 2: Yêu cầu và đặc tả giao thức cổng hợp nhất đối với giao diện cổng trạm ITS phương tiện Intelligent transport systems – Vehicle interface for provisioning and support of ITS services – Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS- SG) interface |
| 2632 |
TCVN 13064-3:2020Hệ thống giao thông thông minh – Giao diện phương tiện để cung cấp và hỗ trợ dịch vụ ITS - Phần 3: Đặc tả API máy chủ và máy khách giao thức giao diện phương tiện hợp nhất Intelligent transport systems - Vehicle interface forprovisioning and support of ITS Services - Part 3:Unified vehicle interface protocol (UVIP) server and client API specification |
| 2633 |
TCVN 13065-1:2020Nhôm và hợp kim nhôm gia công áp lực - Tấm mỏng, băng và tấm - Phần 1: Điều kiện kỹ thuật cho kiểm tra và cung cấp Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 1: Technical conditions for inspection and delivery |
| 2634 |
TCVN 13065-2:2020Nhôm và hợp kim nhôm gia công áp lực - Tấm mỏng, băng và tấm - Phần 2: Cơ tính Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties |
| 2635 |
TCVN 13065-3:2020Nhôm và hợp kim nhôm gia công áp lực - Tấm mỏng, băng và tấm - Phần 3: Băng - Dung sai hình dạng và kích thước Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 3: Strips - Tolerances on shape and dimensions |
| 2636 |
TCVN 13065-4:2020Nhôm và hợp kim nhôm gia công áp lực - Tấm mỏng, băng và tấm - Phần 4: Tấm và tấm mỏng - Dung sai hình dạng và kích thước Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 4: Sheets and plates - Tolerances on shape and dimensions |
| 2637 |
TCVN 13065-5:2020Nhôm và hợp kim nhôm gia công áp lực - Tấm mỏng, băng và tấm - Phần 5: Thành phần hóa học Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 5: Chemical composition |
| 2638 |
TCVN 13066-1:2020Que/thanh, ống và dây kéo nguội - Phần 1: Điều kiện kỹ thuật cho kiểm tra và cung cấp Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 1: Technical conditions for inspection and delivery |
| 2639 |
TCVN 13066-2:2020Nhôm và hợp kim nhôm gia công áp lực - Que/thanh, ống và dây kéo nguội - Phần 2: Cơ tính Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 2: Mechanical properties |
| 2640 |
TCVN 13066-3:2020Nhôm và hợp kim nhôm gia công áp lực - Que/thanh, ống và dây kéo nguội - Phần 3: Thanh và dây tròn - Dung sai hình dạng và kích thước (Dung sai đối xứng cộng trừ trên đường kính) Wrought aluminium and aluminium alloys - Cold-drawn rods/bars, tubes and wires - Part 3: Drawn round bars and wires - Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter) |
