Đăng ngày: 16:00 22-11-2018

ASTM Quốc tế, tên giao dịch tiếng Anh là ASTM International, là một tổ chức tiêu chuẩn quốc tế thực hiện phát triển và xuất bản các tiêu chuẩn kỹ thuật đồng thuận tự nguyện cho loạt các vật liệu, sản phẩm, hệ thống và dịch vụ

Danh mục tiêu chuẩn IEC ban hành tháng 11

New Approved ASTM Standards

A726 - Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types has been revised to A726-18 developed by Committee A06.02, ASTM BOS Volume 03.07.

A976 - Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application has been revised to A976-18 developed by Committee A06.02, ASTM BOS Volume 03.07.

B124/B124M - Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes has been revised to B124/B124M-18a developed by Committee B05.02, ASTM BOS Volume 02.01.

B249/B249M - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings has been revised to B249/B249M-18a developed by Committee B05.02, ASTM BOS Volume 02.01.

B283/B283M - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) has been revised to B283/B283M-18a developed by Committee B05.02, ASTM BOS Volume 02.01.

B488 - Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses has been revised to B488-18 developed by Committee B08.04, ASTM BOS Volume 02.05.

B543/B543M - Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube has been revised to B543/B543M-18 developed by Committee B05.04, ASTM BOS Volume 02.01.

C1484 - Standard Specification for Vacuum Insulation Panels has been reapproved, available as C1484-10(2018) developed by Committee C16.22, ASTM BOS Volume 04.06.

C687 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation has been revised to C687-18 developed by Committee C16.30, ASTM BOS Volume 04.06.

D1610 - Standard Practice for Conditioning Leather and Leather Products for Testing has been revised to D1610-18 developed by Committee D31.07, ASTM BOS Volume 15.04.

D4172 - Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)has been revised to D4172-18 developed by Committee D02.L0.11, ASTM BOS Volume 05.02.

D4705 - Standard Test Method for Stitch Tear Strength of Leather, Double Hole has been revised to D4705-18 developed by Committee D31.07, ASTM BOS Volume 15.04.

D4841 - Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents has been reapproved, available as D4841-88(2018) developed by Committee D19.02, ASTM BOS Volume 11.01.

D5052 - Standard Test Method for Permeability of Leather to Water Vapor has been revised to D5052-18 developed by Committee D31.07, ASTM BOS Volume 15.04.

D6227 - Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Componenthas been revised to D6227-18 developed by Committee D02.J0.02, ASTM BOS Volume 05.03.

D6247 - Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry has been revised to D6247-18 developed by Committee D20.70, ASTM BOS Volume 08.03.

D6290 - Standard Test Method for Color Determination of Plastic Pellets has been revised to D6290-18 developed by Committee D20.40, ASTM BOS Volume 08.03.

D6557 - Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oilshas been revised to D6557-18 developed by Committee D02.B0.01, ASTM BOS Volume 05.03.

D6570 - Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber has been revised to D6570-18a developed by Committee D07.02, ASTM BOS Volume 04.10.

D6593 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions has been revised to D6593-18 developed by Committee D02.B0.01, ASTM BOS Volume 05.03.

D6645 - Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry has been revised to D6645-18 developed by Committee D20.70, ASTM BOS Volume 08.03.

D6886 - Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography has been revised to D6886-18 developed by Committee D01.21, ASTM BOS Volume 06.01.

D7318 - Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration has been revised to D7318-18 developed by Committee D02.03, ASTM BOS Volume 05.04.

D7321 - Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration has been revised to D7321-18a developed by Committee D02.14, ASTM BOS Volume 05.04.

D7501 - Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT) has been revised to D7501-18a developed by Committee D02.14, ASTM BOS Volume 05.04.

D7547 - Standard Specification for Hydrocarbon Unleaded Aviation Gasoline has been revised to D7547-18a developed by Committee D02.J0.02, ASTM BOS Volume 05.04.

D7719 - Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline has been revised to D7719-18 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.

D7854 - Standard Test Method for Carbon Black-Void Volume at Mean Pressure has been revised to D7854-18b developed by Committee D24.11, ASTM BOS Volume 09.01.

D7960 - Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components has been revised to D7960-18 developed by Committee D02.J0.02, ASTM BOS Volume 05.05.

D8016 - Standard Test Method for Silica, Precipitated, Hydrated—Sears Number has been revised to D8016-18 developed by Committee D11.20, ASTM BOS Volume 09.01.

E2356 - Standard Practice for Comprehensive Building Asbestos Surveys has been revised to E2356-18 developed by Committee D22.07, ASTM BOS Volume 11.07.

F1334 - Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners has been revised to F1334-18 developed by Committee F11.25, ASTM BOS Volume 15.11.

F2016 - Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings has been reapproved, available as F2016-00(2018) developed by Committee F25.07, ASTM BOS Volume 01.08.

F2039 - Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Programhas been reapproved, available as F2039-00(2018) developed by Committee F25.07, ASTM BOS Volume 01.08.

F2105 - Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems has been revised to F2105-18 developed by Committee F11.22, ASTM BOS Volume 15.11.

F2382 - Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT) has been revised to F2382-18 developed by Committee F04.16, ASTM BOS Volume 13.01.

F2713 - Standard Specification for Eye Protectors for Field Hockey has been revised to F2713-18 developed by Committee F08.57, ASTM BOS Volume 15.07.

F2988 - Standard Specification for Commercial Coffee Brewers has been revised to F2988-18 developed by Committee F26.03, ASTM BOS Volume 15.12.

New ASTM Work Items

WK65596 - Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading is a work item revision to existing standard E855-08(2013)

WK65598 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service is a work item revision to existing standard A632-04(2014)

WK65599 - Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes is a work item revision to existing standard A943/A943M-01(2014)

WK65600 - Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe is a work item revision to existing standard A949/A949M-01(2014)

WK65602 - Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Testis a work item revision to existing standard D130-18

WK65603 - Standard Consumer Safety Specification for High Chairs is a work item revision to existing standard F404-18

WK65604 - Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) is a work item revision to existing standard D1500-12(2017)

WK65605 - Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area (Withdrawn 2018) is a work item for the reinstatement of the withdrawn standard F446-85(2009)

WK65606 - Standard Specification for Rubber Insulating Matting is a work item revision to existing standard D178-01(2010)

WK65607 - Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer is a work item revision to existing standard D7058-04(2014)

WK65609 - Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy is a work item revision to existing standard D6480-05(2010)

WK65610 - Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products is a work item revision to existing standard B749-14

WK65611 - Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis is a work item revision to existing standard B982-14e1

WK65615 -Test Method for the Determination of Chemical Composition Distribution of Linear Polyolefins by Temperature Rising Elution Fractionation (TREF)

WK65616 - Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films is a work item revision to existing standard E1753-13

WK65617 - Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces is a work item revision to existing standard F1279-08(2014)

WK65618 - Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces is a work item revision to existing standard F1280-14

WK65621 - Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment is a work item revision to existing standard F2461-18

WK65623 - Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) is a work item revision to existing standard D5341/D5341M-17a

WK65624 - Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains is a work item revision to existing standard A762/A762M-15

WK65627 - Standard Specification for Primary Zirconium is a work item revision to existing standard B494/B494M-08(2014)

WK65628 -Specification for Standard Specification for Welded Copper and Copper-Alloy, Condenser and heat Exchanger Tubes with a Texture Surface (s).

WK65630 - Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection is a work item revision to existing standard F1886/F1886M-16

WK65633 - Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke is a work item revision to existing standard D5003-06a(2017)

WK65634 - Standard Specification for Automotive Spark-Ignition Engine Fuel is a work item revision to existing standard D4814-18c

WK65639 - Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems is a work item revision to existing standard F2376-17a

WK65640 -Test Method for Determination of Natural Occurrences of Asbestos (NOA) by Polarized Light Microscopy, X-Ray Diffraction, Scanning Electron Microscopy, and Transmission Electron Microscopy.

WK65642 - Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation is a work item revision to existing standard C578-18

WK65643 - Standard Practice for Use of Scrap Tires in Civil Engineering Applications is a work item revision to existing standard D6270-17

WK65644 - Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings is a work item revision to existing standard G11-04(2012)

WK65645 - Standard Practice for Measurement of Body Armor Wearers is a work item for the withdrawal and replacement of the existing standard E2902-12

WK65646 - is a work item for the withdrawal and replacement of the existing standard E2902-12

WK65647 - Standard Practice for Annual Review of Test Methods and Specifications for Plastics is a work item revision to existing standard D4968-17

New Approved ASTM Standards

B329 - Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter has been revised to B329-18 developed by Committee B09.03, ASTM BOS Volume 02.05.

C125 - Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-18b developed by Committee C09.91, ASTM BOS Volume 04.02.

C1574 - Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation has been reapproved, available as C1574-04(2018) developed by Committee C16.32, ASTM BOS Volume 04.06.

C615/C615M - Standard Specification for Granite Dimension Stone has been editorially changed, available as C615/C615M-18e1 developed by Committee C18.03, ASTM BOS Volume 04.07.

D1148 - Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces has been reapproved, available as D1148-13(2018) developed by Committee D11.15, ASTM BOS Volume 09.01.

D2421 - Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis has been revised to D2421-18 developed by Committee D02.H0, ASTM BOS Volume 05.01.

D4239 - Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion has been editorially changed, available as D4239-18e1 developed by Committee D05.21, ASTM BOS Volume 05.06.

D5343 - Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners has been reapproved, available as D5343-06(2018) developed by Committee D12.16, ASTM BOS Volume 15.04.

D6048 - Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers has been reapproved, available as D6048-07(2018) developed by Committee D11.12, ASTM BOS Volume 09.01.

D6976 - Standard Specification for Rubber Contraceptives—Vaginal Diaphragms has been reapproved, available as D6976-13(2018) developed by Committee D11.40, ASTM BOS Volume 09.02.

D7038 - Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants has been revised to D7038-18a developed by Committee D02.B0, ASTM BOS Volume 05.04.

D7419 - Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection has been revised to D7419-18 developed by Committee D02.04.0C, ASTM BOS Volume 05.04.

E1753 - Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films has been revised to E1753-18a developed by Committee E06.23, ASTM BOS Volume 04.11.

E544 - Standard Practice for Referencing Suprathreshold Odor Intensity has been revised (with title change) to E544-18 developed by Committee E18.04, ASTM BOS Volume 14.03.

F1960 - Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing has been revised (with title change) to F1960-18 developed by Committee F17.10, ASTM BOS Volume 08.04.

F3294 - Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy is a new standard, now available. F3294-18 developed by Committee F04.46, ASTM BOS Volume 13.02.

F430 - Standard Specification for Paper Used for Vacuum Cleaner Filter Bags has been reapproved, available as F430-13(2018) developed by Committee F11.23, ASTM BOS Volume 15.11.

F704 - Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints has been reapproved (with editorial change), available as F704-81(2018)e1 developed by Committee F25.11, ASTM BOS Volume 01.07.